|
Product Details:
Payment & Shipping Terms:
|
High Light: | portable welding machine,stainless steel welding equipment |
---|
Stick 220V MMA Welding Machine 3 Phase electric arc for stainless steel
Quick Detail:
Model:HM315II,HM400II,HM500II,HM630II
DC IGBT Inverter technology
Input:3P/220V±10%,3P/380V±10%,3P/415V±10%,3P/440V±10%,50/60HZ
Rated duty cycle:60%(under 40℃)
HM630 can be used for Carbon-Arc gouging
Suitable for stainless steel,carbon steel and Low alloy steel etc
Application:
1. For fields of boiler,pressure vessel,chemical industry,shipping,vehicle,petroleum engineering building,electric station & facilities,industry equipments installation,etc.
2. For mild steel,stainless steel,low alloy steel,ect.
Specifications:
Parameter
Model |
Rated input power |
Rated |
Rated |
Output current(A) |
Rated |
Efficiency (%) |
HM315II |
3-Phase,380V |
13 |
60 |
30~315 |
32.6 |
85 |
HM400II |
18 |
60 |
40~400 |
36 |
85 |
|
HM500II |
26 |
60 |
50~500 |
40 |
85 |
|
HM630II |
36 |
35 |
50~630 |
44 |
85 |
Parameter |
Power factor |
No-load voltage(V) |
No-load wastage(W) |
Isolation grade |
Shell protection grade |
Weight (Kg) |
Dimension |
HM315II |
0.93 |
80 |
80 |
F |
IP21S |
42 |
650×335×670 |
HM400II |
0.93 |
80 |
80 |
F |
IP21S |
42 |
650×335×670 |
HM500II |
0.93 |
80 |
80 |
F |
IP21S |
47 |
690×335×670 |
HM630II |
0.93 |
80 |
80 |
F |
IP21S |
69 |
770×380×635 |
Competitive Advantage:
1. Stable electric arc,less splash,and the welding line is performed perfectly.It is suitable for welding in acidic rod,alkaline rod and cellulose rod downwards welding.It also can be used for carbon arc gouging(HM 500).
2. Adopte advanced soft switch technology,PWM modulation technology,particular closed loop control system to make sure steady driver signal and reliable key component,meantime,high inverter frequency can reach to 20KHz.
3. Its dynamic characteristic is perfect and response is rapid,so it can be used for welding from every position.
4. The current for arc igiting can be adjusted freely.Arc can be ignited easily with stable current even under little current.
5. Push current can be adjusted for perfect arc capability and avoiding conglutination.
6. Current and voltage are displayed by digital numbers.Welding current can be preset.
7. ts compensation ability of power source voltage is perfect.Welding can be performed normally under the power voltage from 340V to 420V.
8. Safety and reliability can be insured with over-current & over-heating protection and EMC & EMI.
Research and development department
Contact Person: Miss. Alice
Tel: 0086 13812538595
Fax: 86-510-85470009